All orders, wherever possible are shipped the same day within the UK as long as it is received before 1 pm.
Orders placed on Friday after 1 pm or the weekend will be dispatched on Monday.
Couldn't load pickup availability
The NOVUS N1040 USB PID temperature controller offers automatic PID tuning, thermocouple and Pt100 sensor compatibility, and USB configuration in a 48 x 48mm (1/16 DIN) panel format. Use the USB connection with NOVUS QuickTune software to configure settings and adjust parameters during commissioning.
This N1040-PR-USB controller is listed with SSR/relay output and accepts Type J, K and T thermocouples or Pt100 RTDs. Sensor input selection does not require hardware changes or recalibration, making it easier to match the controller to your temperature measurement setup.
| Manufacturer | NOVUS |
|---|---|
| Model / product reference | N1040 / N1040-PR-USB |
| Configuration connection | USB |
| Sensor inputs | Type J, K and T thermocouples; Pt100 RTD |
| Control | PID with automatic tuning |
| Output type | SSR/relay |
| Front dimensions | 48 x 48mm (1/16 DIN) |
| Front panel protection | IP65 |
| Alarm functions | Low, high, differential, low differential, high differential and sensor break |
| Loop monitoring | LBD (Loop Break Detection) |
| Sensor failure response | Safe output function allows control output conditions to be set for sensor break or failure |
| Programming protection | Keypad protection |
| Front keypad | Silicone rubber |
| Identification | 8-digit electronic serial number accessible from the display |
Match the N1040-PR-USB to your sensor type, required control and alarm outputs, and electrical supply before ordering. Confirm the body depth and panel cut-out against your installation, particularly when replacing an existing controller. If you require a specific output arrangement or RS485 communications, contact Under Control Instruments to confirm the exact model specification.
Find a matching sensor in our Pt100 and thermocouple temperature sensor range.
QuickTune is free configuration software for NOVUS controllers and indicators. It provides access to device settings and parameter adjustments, with diagnostic and monitoring tools to support commissioning and field service. For this USB model, it offers a practical alternative to entering settings through the front keypad.
PID stands for proportional, integral and derivative control. A PID controller compares the measured temperature with the target setpoint and adjusts its output to manage the difference. The N1040 includes automatic tuning of PID parameters to help set up the control process.
All orders, wherever possible are shipped the same day within the UK as long as it is received before 1 pm.
Orders placed on Friday after 1 pm or the weekend will be dispatched on Monday.
Have an account?
Log in to check out faster.