HENNY PENNY 27308 COMPUTRON 8000 BENT CONTROL PANEL DECAL – 0-9 SETTINGS

Genuine Henny Penny 27308 Computron 8000 Bent Control Decal for compatible Henny Penny commercial pressure fryers.

This replacement control panel decal / overlay is designed for Henny Penny equipment fitted with the Computron 8000 control system and bent control panel. It features the printed 0–9 settings and control markings required for the front operating panel.

Ideal for replacing a worn, faded, scratched, damaged or difficult-to-read original control decal during commercial fryer servicing, maintenance or refurbishment.

Henny Penny's official parts documentation identifies 27308 as “Decal – Control – Bent” for the Model 8000 Computron control panel.

Key Features

• Genuine Henny Penny replacement part

• Henny Penny part number 27308

• Computron 8000 control panel decal

• Bent control panel configuration

• 0–9 settings

• Replacement front control-panel decal / overlay

• Helps restore clear control markings and professional appearance

• Suitable for commercial catering and foodservice equipment

• Ideal for fryer servicing and refurbishment

• Decal only – control panel, computer and switches are not included

Compatibility

The Henny Penny 27308 decal is associated with the Computron 8000 control system and compatible Henny Penny pressure fryer equipment.

Current parts information identifies the part as fitting Computron 8000, PFG-600 and additional compatible models, subject to the exact control-panel configuration.

Known applications include:

• Henny Penny Computron 8000

• Henny Penny C8000

• Henny Penny PFG-600

• Compatible Henny Penny gas pressure fryers using the bent Computron 8000 control panel

Important: This part is specifically for the BENT control-panel configuration. Henny Penny also lists 24849 as the control decal for the FLAT configuration. Please compare your existing panel before ordering.

Henny Penny Part Number

27308

Manufacturer Description

DECAL – CONTROL – BENT

Control System

Computron 8000 / C8000

Settings

0–9

Part Type

Control Panel Decal / Control Overlay / Facia Decal

Product Specifications

*Dimensions and weight are manufacturer/parts-distributor listed specifications and should be treated as approximate.

What Is the Henny Penny 27308 Decal?

The 27308 is the printed control decal that sits on the bent control panel of compatible Henny Penny Computron 8000 equipment.

It provides the operator with the printed markings and settings required to identify and operate the fryer controls.

Henny Penny's official Model 8000 parts documentation lists the control-panel components separately, including menu cards, power switch and the control decals. The parts list specifically identifies:

• 27308 – Decal, Control – Bent

• 24849 – Decal, Control – Flat

• 32658 – Decal, C8000-02

• 39269 – Decal, C8000-02 Wendy's

• 72170 – Decal, C8000-02 Wendy's English/French

This makes it important to match the replacement decal to the exact control-panel version.

Why Replace the Control Decal?

The front control decal can deteriorate over years of commercial kitchen use due to:

• Frequent operation

• Heat exposure

• Cleaning chemicals

• Grease and oil contamination

• Scratching and abrasion

• Fading

• Peeling or lifting

• General wear and tear

A replacement 27308 control decal can help restore the original appearance and make the fryer controls easier to identify.

It is particularly useful when refurbishing older Henny Penny pressure fryers where the electronic control system remains operational but the original graphics have become worn.

Installation

For best results:

1. Switch off and isolate the fryer from the electrical supply.

2. Allow the fryer and control panel to cool completely.

3. Carefully remove the existing decal.

4. Remove any remaining adhesive from the panel.

5. Clean and degrease the surface thoroughly.

6. Allow the surface to dry completely.

7. Position the replacement decal carefully before removing the backing completely.

8. Apply the decal gradually and press firmly into place.

9. Check alignment around the switches, display and control buttons.

For commercial catering equipment, installation should be carried out by a suitably qualified service engineer where appropriate.

Important Compatibility Warning

PLEASE CHECK BEFORE ORDERING

Henny Penny produced different Computron control-panel decals for different panel configurations.

27308 is the BENT control decal.

Henny Penny separately lists 24849 as the FLAT control decal.

Please compare:

• Existing decal

• Control-panel shape

• Fryer model

• Computron version

• Existing part number

before purchasing.

If you are unsure which decal you require, contact us with a photograph of the existing control panel and the fryer model/serial information and we can help identify the correct part.

What's Included?

1 × Henny Penny 27308 Computron 8000 Bent Control Panel Decal

Not Included

• Computron 8000 computer/controller

• PCB

• Control panel

• Push buttons

• Switches

• Display

• Fryer

• Other components

Genuine OEM Part

The 27308 manufacturer part number is documented by Henny Penny as the Computron 8000 bent control decal. Independent commercial catering parts suppliers also identify 27308 as the Henny Penny Decal, Control, Bent, 0–9 Settings, Computron 8000.