All orders, wherever possible are shipped the same day within the UK as long as it is received before 1 pm.
Orders placed on Friday after 1 pm or the weekend will be dispatched on Monday.
The Low Temperature Dry Block/Wet Calibrator (-50℃ to +140℃) delivers consistent, precise, and uniform temperature settings with rapid stabilization, making it highly efficient for both laboratory and field applications. Designed for portability and convenience, it is widely used for the calibration of temperature sensors, standard thermometers, thermocouples, thermal resistors, and dilatation thermometers.
By eliminating slow heat-up times and temperature inaccuracies often found in cheaper calibrators, the UCI-ST-AS-CAL provides faster calibration cycles, higher accuracy, and long-term reliability. Its advanced heating principle design, combined with rapid cooling and intuitive operation, ensures maximum efficiency and meets international calibration standards.
Ultra-Wide Temperature Range: -50℃ to +140℃ for versatile calibration needs.
Dual-Mode Functionality: Supports both dry block calibration and wet calibration using inserts or liquid (e.g., anhydrous ethanol).
Fast Heat-Up & Cooling: Reaches maximum temperature in ~20 minutes and minimum temperature in ~45 minutes.
High Accuracy & Stability: ±0.2℃ accuracy and ±0.05℃ stability for reliable results.
Uniform Temperature Distribution: Axial uniformity within 1℃ (40 min) and radial uniformity 0.1–0.2℃.
Lightweight & Portable: Compact design (only 6–10kg) for easy transport.
Advanced Interface: LCD touch screen with simple, intuitive operation.
Data Management: Built-in data logging and USB interface for data export.
Automatic Switch Test: Automatic ramping and recording of switch points.
Safety & Compliance: Over-temperature and short-circuit protection, CE and RoHS certified.
Parameter | Specification |
---|---|
Temperature Range | -50℃ to +140℃ |
Accuracy | ±0.2℃ |
Stability | ±0.05℃ |
Axial Uniformity | ≤ 1℃ within 40 min |
Radial Uniformity | 0.1℃ – 0.2℃ |
Resolution | 0.01℃ |
Display | LCD display (℃ / ℉) |
Heating Time | To +140℃ in approx. 20 minutes |
Cooling Time | To -50℃ in approx. 45 minutes |
Block Depth | 160mm |
Insert Diameter | 24.8mm, with interchangeable multi-hole inserts (3–12mm dia) |
Stable Time | 15 minutes |
Dimensions | 310 × 190 × 340 mm |
Weight | 6–10kg (depending on configuration) |
Power Supply | 100–115V AC ±10% or 200–230V AC ±10%, 50/60Hz, 575W |
Fuse | 115V: 6.3A T 250V / 230V: 3.15A T 250V |
Operating Conditions | 0℃ to +35℃, 30–80% RH (non-condensing), <2000m |
Storage Conditions | -20℃ to +60℃, 0–90% RH (non-condensing) |
Certifications | CE, RoHS compliant |
On-site calibration of temperature sensors, thermocouples, RTDs, and thermometers
Quality control in pharmaceutical, food, machinery, and chemical industries
Dry block mode: Quick probe calibration without fluids
Wet calibration mode: For sensors requiring fluid immersion with higher thermal transfer
Industrial laboratories and service teams requiring portable, accurate calibration
A dry-block calibrator, also known as a dry-well calibrator, is a device used to calibrate temperature measurement instruments such as thermocouples, thermometers, thermistors, and resistance temperature detectors (RTDs). Unlike other calibration methods that might use liquid baths, dry-block calibrators provide a stable and uniform temperature source in a dry environment.
Heating/Cooling: The dry-block calibrator heats or cools a metal block to a precise temperature.
Insertion: The block has pre-drilled holes where temperature sensors or probes are inserted.
Stabilization: The calibrator stabilizes at the set temperature to ensure uniform heat distribution.
Measurement: The readings from the sensors are compared to the calibrator’s displayed temperature, and any discrepancies are noted and adjusted.
Dry-block calibrators are widely used in industries where precise temperature control is crucial, such as:
Pharmaceuticals: Ensuring medications are stored at correct temperatures.
Food and Beverage: Maintaining product quality and safety.
Manufacturing: Ensuring machinery and equipment function properly.
All orders, wherever possible are shipped the same day within the UK as long as it is received before 1 pm.
Orders placed on Friday after 1 pm or the weekend will be dispatched on Monday.
If your not sure which calibrator you need, this will help you to make a better selection of choice.