How to use the cartridge heater price calculator?

Simply fill in all the relevant boxes with the information and the calculator will tell you what it will cost, it’s as simple as that! If you decide to place the order then email the details over, we will order confirm by return.

Where are cartridge heaters used?

Cartridge heaters are used in many applications where it is required to get heat into a metal moulding tool. These could be presses, heating jaws and injection moulding tools.

What temperature can cartridge heaters be made to?

The normal operating temperatures are usually below a sheath temperature of 650 deg C. However, they can be made suitable for temperatures up to 800 deg C upon request.

What are the advantages of cartridges heaters?

The advantage of using a cartridge heater is that because they are high powered, they can push a large amount of heat into a metal block in a relatively short period of time. The cartridge heaters are made to a tight tolerance to ensure the best heat transfer possible.

For more standard sizes, click here.

cartridge heater leads close up

For best results, cartridge heaters should be used with temperature controllers. We also offer thermocouples and PT100 sensors to complete the control loop.

Cartridge Heater Calculator

Cost calculator for non-stock sizes
UCI Cartridge Heater Price Calculator
£5

Useful Power Calculator

Use this simple calculator to work out any heating element's Ohms, Amperage, voltage, and wattage.

Power Calculator
Ω Resistance
A Current
V Voltage
W Power
Enter 2 values and press Calculate

Ohms Law

Calculator

We have created this conversion calculator based on Ohms law. Please feel free to use it.

Functional if you need to work out your load requirements.

Also, if the wattage is not on display on the heating element

Other stock cartridge heater sizes

Part No.QtyDiaLengthWattsvoltsCable mmothers infoSale Price £
CH550150230105mm50mm1502303007.50
CH65025023056mm50mm25023010007.50
CH653015042-EUROSLOT66.5mm30mm15042300Angled Exit6.50
CH10150500220110mm150mm5002203008.00
CH122804002301212mm280mm400230200Armoured leads13.00
CH12565600220112.5mm65mm6002203007.50
CH12580500230612.5mm80mm500230350stainless overbraid6.00
CH1251004002302012.5mm100mm4002303006.00
CH1255250240281/2"5.5"2502404006.00
CH128250240ANG101/2"8"2502401000stainless overbraid, angled11.00
CH15300300240ANG315300mm3002401500Angled Exit12.00
CH1675400220116mm75mm4002203007.50
CH1663175230316mm63mm17523010008.00
CH16300650240416mm300mm65024020011.00
CH583175240ANG55/8"3"1752402000Angled Exit9.00
CH586635240105/8"6"6352402009.00