heating solutions


Answers required for correct Cartridge Heater selection

Tweet # When looking at selecting a cartridge heater, the following questions must be considered to ensure your cartridge heaters performance is optimized. Maximum temperature? (type of heater) Are they fitted into a moving tool? (lead selection) Termination option? (straight or right angle) Time required to get up to temperature? […]


How to keep hot foods hot and fresh

Tweet # Keeping hot foods hot is very important to ensure food safety and presents challenges. Bacterial growth slows down once at temperatures hotter than 60°C, so hot foods that are being served on a buffet, for example, must be kept hotter than that at all times. Keep in mind […]


temperature control

Can #cartridge #heaters be used to heat air?

Tweet # Cartridge heaters are not suitable for heating air as they are generally high powered heating elements that are use to transferring their heat to other metal bodies such as mould tools and heat presses. If the cartridge heater is left to heat up on its own in open […]


How to make your #infrared lamps last longer

Tweet # If you find that your infrared #lamps are just not lasting as long as they should you should try the following which will improve the performance. These are common occurrences in the commercial kitchen and mobile paint automotive environments.   Check that the cabling is connected correctly and […]


Differences between #ceramicheaters and #quartzheaters

Tweet # A lot of people ask us this question “which one we would recommend for my application”. The main choices are below… Ceramic heaters emit infrared from the far-wave of the visable spectrum whist quartz heaters emit infrared from the medium wave visable spectrum. Quartz heaters They heat up […]

UCI blog

UCI blog

What are the common causes of #industrial-heater failure?

Tweet # Liquid Contamination is the most common cause of cartridge heater failure. This is caused by the likes of moisture, hydraulic oils, and melted plastic that are seen on failed heaters. Other causes are lead abrasion and movement, inadequate heat-sink, high operating temperatures (inadequate temperature control). Share This: Tweet #