SEALED HOT RUNNER HEATING ELEMENTS


STAINLESS STEEL CONSTRUCTION

Spring coil heater sealed within a stainless steel sheath.

Power: 150W~2500W(tolerance less than 5%)
Voltage: 230V
Maximum Working Temperature: 650℃
Inner Diameter: 11mm~50mm(tolerance 0~+0.04)
Wall thickness: 2.5mm~4.0mm
Material Inner sleeve: stainless steel 304 with smooth surface
Material outer Sleeve: stainless steel 304
Material end Covers: brass
Heater Length: 30mm~200mm
Unheated wire length: 45mm~50mm
Terminal size: max. diameter 9.5mm, length 30mm
Length of Cable: 1m (sheathed in silica-coated fiberglass sleeve, heat resistance up to 250℃)

Resistance Wire: Ni80Cr20
Insulation: MgO
Sheath: stainless steel 304
Cross-section Dimension(mm): 4.2×2.2, 2.2×1.5

CODEINNER DIA MMLENGTH MMCABLE LENGTH MM
HTS11-1530-1001000
HTS11-15100-1501000
HTS11-15150-2001000
HTS15-2530-1001000
HTS15-25100-1501000
HTS15-25150-2001000
HTS25-3530-1001000
HTS25-35100-1501000
HTS25-35150-2001000
HTS35-5030-1001000
HTS35-50100-1501000
HTS35-50150-2001000

STAINLESS STEEL CONSTRUCTION WITH THERMOCOUPLE

Spring coil heater sealed within stainless steel, with built-in thermocouple, type J or K.

Power:  150W~2500W(tolerance less than 5%)

Voltage:  230V

Maximum Working Temperature: 650℃

Inner Diameter:  11mm~50mm(tolerance 0~+0.04)       

Wall thickness:  2.5mm~4.0mm

Material inner Sleeve: stainless steel 304 with smooth surface

Material outer Sleeve: stainless steel 304

Material end Covers: Brass

Heater Length:  30mm~200mm   

Unheated wire length:  45mm~50mm

Terminal:  max. diameter 9.5mm, length 30mm

Length of Cable:  1m (sheathed in silica-coated fibreglass sleeve, heat resistance up to 250℃)

Type of Built-in Thermocouple:  J, K(normally J)

 

Resistance Wire:  Ni80Cr20

Insulation:  MgO

Sheath:  stainless steel 304

Cross-section Dimension(mm):  4.2×2.2, 2.2×1.5

CODEINNER DIA MMLENGTH MMCABLE LENGTH MM
HTS J/K11-1530-1001000
HTS J/K11-15100-1501000
HTS J/K11-15150-2001000
HTS J/K15-2530-1001000
HTS J/K15-25100-1501000
HTS J/K15-25150-2001000
HTS J/K25-3530-1001000
HTS J/K25-35100-1501000
HTS J/K25-35150-2001000
HTS J/K35-5030-1001000
HTS J/K35-50100-1501000
HTS J/K35-50150-2001000

ALUMINIUM CONSTRUCTION WITH THERMOCOUPLE

Spring coil heater sealed within aluminium with a built-in thermocouple, type J or K.

Power:  150W~1500W (tolerance less than 5%)

Voltage:  230V

Maximum Working Temperature: 550℃

Inner Diameter:  8mm~50mm (tolerance 0~+0.04)       

Wall thickness:  2.5mm~4.0mm

Material inner Sleeve: stainless steel 304 with smooth surface

Material outer Sleeve: stainless steel 304

Material end Covers: Brass

Heater Length:  30mm~200mm   

Unheated wire:  45mm~50mm

Terminal:  max. diameter 9.5mm, length 30mm

Length of Cable:  1m (sheathed in silica-coated fiberglass sleeve, heat resistance up to 250℃)

Feature:  Inner slot for thermocouple sensor

Coil Heating Wire (embedded in a aluminum)

Resistance Wire:  Ni80Cr20

Insulation:  MgO

Sheath:  stainless steel 304

Diameter of Wire:  1.4mm, 1.5mm

CODEINNER DIA MMLENGTH MMCABLE LENGTH MM
HTSA8-1530-1001000
HTSA8-15100-1501000
HTSA8-15150-2001000
HTSA15-2530-1001000
HTSA15-25100-1501000
HTSA15-25150-2001000
HTSA25-3530-1001000
HTSA25-35100-1501000
HTSA25-35150-2001000
HTSA35-5030-1001000
HTSA35-50100-1501000
HTSA35-50150-2001000

Share This:
Facebooktwittergoogle_pluslinkedinmail